There are different types of heating oil. The main type of heating oil used in most homes and commercial applications is “number two” heating oil. Number six heating oil is rarely used and is being phased out of use because it contains a lot of sulfur and other pollutants. Number two heating oil is designed to work with your oil furnace or boiler. (more…)
DDC Outside Air Economizer System - Outside louvers allow the DDC control system to open dampers and introduce fresh air into the building. Building automation system, or the energy management system as it is sometimes called, monitors outside air temperature and humidity and based on a calculation and opens the outside air dampers when this calculation determines a precise set point. (more…)
HVAC Careers - So you want to become an HVAC Technician and want to know how to find a successful career? It’s not easy but here’s some help for you. First of all, you need a good foundation of the basics and it would help if you understood the different types of jobs you can find by pursuing a career in HVAC. (more…)
HVAC Duct Systems - Ductwork systems channel the air to the spaces where it is needed from the air handler. HVAC duct systems also will pull the air from the space and channels it back to the air handler where it needs to be conditioned. In some commercial applications, the area above the ceiling is considered the return duct. All the return air is channeled back to the air handler through the plenum where it is conditioned in the air handler. Part of the conditioning process is the air being passed through an air filter and then an exchanger like a coil or heat exchanger. (more…)
Air Handler Blower Motor - All air handling units have a blower located inside the air handler cabinet. The air handler blower motor has a motor that drives it. Some air handling unit blowers are direct drive and some are belt driven.
Many light commercial and residential blowers are direct drive blower motors by the motor’s shaft while many commercial air handling units are belt driven by the blower motor and some sheaves attached to the blower motor shaft and the shaft attached to the blower wheel.
Some sheaves are adjustable and some are not. If the belt is slipping always change the belt first before adjusting the sheave. Adjusting the sheave can cause the unit to produce more or less than designed airflow. Sheaves are typically set by Testing and Balancing HVAC Technicians. (more…)
