Actuators for Chilled Water Valve - These chilled water actuators control the flow rate for a chilled water system in a data center. There are various sequences of operations for chilled water systems and the sequence of operations is usually always different from one chiller plant to another chiller plant. (more…)
Electronic Ignition vs Standing Pilot - Modern gas furnaces use electronic ignition systems to light the burner’s modern furnaces. One can still purchase a gas furnace or water heater with the old standing pilot ignition systems. These systems have been proven reliable and safe over time.
However, why would someone want to purchase a gas furnace or water with a standing pilot ignition system rather than purchase a gas furnace or water heater with an electronic ignition system? Let’s define the two different types of gas furnace or water heater ignition systems. Then we will surmise based on that why someone would purchase a standing pilot gas ignition system over an electronic ignition system.
(more…)
DDC Controlled Chilled Water Actuator
DDC Controlled Chilled Water Actuator | HVAC Automation. This chilled water actuator is attached to a valve which supplies chilled water to the air handling unit. The air handling has a chilled water coil. The actuator modulates the valve based on a set point inside the DDC program. If the program has trim and respond capabilities the set point will rise up and down based on demand. Demand from the VAV boxes or the HVAC zones. Most DDC controlled actuators work off of a DC volt or current signal. (more…)
Belimo Actuators Automatic Valve Control - Many processes or actions in HVAC are made more efficient by having them automatically controlled by the control system. This enhancement of efficiency is possible by using Belimo actuator valve control. The Belimo automatic HVAC valve control is made possible with DDC and modulating electric Belimo actuators. (more…)
Automatic Flow Valve
HVAC Piping Valves | Heating and Cooling Hydronics - Triple Duty Valves are three valves in one as the name implies. Triple Duty Valves act as a check valve, balancing valve, and shut-off valve all in one valve.
From the smallest hydronic loops to the largest hydronic loops triple duty valves are very a popular selection for engineers when designing hydronic loops for chilled water and hot water applications. The triple-duty valve consists of a threaded stem attached to a disc. The disc has a spring that will allow the disc to open when the flow is induced throughout the loop. (more…)
Gas Valve Troubleshooting - Gas valves used in modern state-of-the-art residential gas furnaces are typically controlled via a state-of-the-art electronic ignition control or a printed circuit board. Other types of gas valves include the standing pilot gas valve.
Gas valves can be found on gas furnaces, gas-fired steam boilers or hot water boilers, and gas-fired water heaters. With gas valve troubleshooting and any “gas valve” issues, safety is always first.
When troubleshooting a gas valve, the technician should only be concerned with input to the gas valve and output of the gas valve, whether it is an electronic module or circuit board controlled gas valve, or a standing pilot gas valve. The input with gas valve troubleshooting includes ensuring the safety circuit is good.
