Air Handler Water Coil Freeze Stat | Freezing Protection Control

by | Air Handlers | 0 comments

Air Handler Water Coil Freeze Stat - Freezing Protection Control
Air Handler Water Coil Freeze Stat - The HVAC Air Handler Freeze Stat is a low-temperature limit control and it is used mainly in commercial systems in the ductwork on economizers or in air handlers just before any coil especially water coils. It is a safety and protection control to prevent extremely cold air from reaching the hot water or chilled water coils inside the air handler where the air enters from the economizer.

Under ideal control setup if the freeze stat trips the economizer dampers close and the blower fan stops. This prevents coils from freezing. A frozen coil can bust open and will need to be replaced if it freezes. This is the purpose of the freeze stat in HVAC air handler applications which utilize economizers for free cooling and other purposes.
(more…)

Air Handler Components 3 | HVAC Air Handling

by | Air Handlers | 0 comments

Air Handler Components 3Air Handler Components 3 - Hot water coils inside of air handler units combine a boiler system or a special capacity hot water heater and forced air to provide forced-air heating. The concept is simple and used a lot in commercial and some in residential.

Commercial systems almost exclusively use a boiler to provide hot water to the hot water coil inside the air handler unit while the residential systems use mainly special capacity hot water heaters to provide hot water to the hot water coil inside the air handler unit.

On a call for heat, a pump is energized to begin the circulation of hot water from the heating source to the coil. The air handler unit blower motor energizes and the air begins to move across the coil. Heat is exchanged from the hot water coil to the air and the air is delivered to its appropriate destination through the ductwork.

(more…)