DDC Programming Logic Symbols 1 - DDC programming in HVAC Control can be rather complex especially to those who don’t understand software or programming. Some software and hardware manufacturers utilize symbols to build their logic programs for HVAC DDC control. Some of these logic blocks are rather complex but others are very simple. (more…)
DDC Programming Logic 3 - DDC control logic blocks have practically an unlimited way of arranging the blocks for HVAC control. Below is an example of a line of logic blocks arranged for static pressure control of a VAV air handler supply fan using a variable frequency drive. This same arrangement could also be used for static pressure control using a bypass damper instead of a VFD. (more…)
Programming DDC Logic 2 - The analog network input is similar to an analog input except this input is not hardwired to the local controller but on a remote controller in the network. It is very important that the communication works effectively for this analog network input to work. An example of this is the outside air temperature which is hardwired to a DDC controller in the penthouse of a multistory building.
The building engineer only wants the boilers to fire if the outside air temperature is less than 55° F. Instead of having an outside air temperature device hardwired to the boiler controller an analog network input can be placed into the boiler controller program and linked to the outside air temperature reading which is in the penthouse controller where the outside air temperature thermistor is hardwired. This saves devices and wires necessary for optimum control.
