Air Handler Components 3 | HVAC Air Handling

by | Air Handlers | 0 comments

Air Handler Components 3Air Handler Components 3 - Hot water coils inside of air handler units combine a boiler system or a special capacity hot water heater and forced air to provide forced-air heating. The concept is simple and used a lot in commercial and some in residential.

Commercial systems almost exclusively use a boiler to provide hot water to the hot water coil inside the air handler unit while the residential systems use mainly special capacity hot water heaters to provide hot water to the hot water coil inside the air handler unit.

On a call for heat, a pump is energized to begin the circulation of hot water from the heating source to the coil. The air handler unit blower motor energizes and the air begins to move across the coil. Heat is exchanged from the hot water coil to the air and the air is delivered to its appropriate destination through the ductwork.

(more…)

Air Handler Components

by | Air Handlers | 0 comments

Air Handler Components. This article will take different types of air handlers and disassemble them part by part. This will give you a good description of each part and hopefully a better understanding of the air handler. Most of the components associated with the air handler are in the air handler. However, there are a few components which are not in the air handler but associated with the air handler.

There are some hot water and cold water coils which are not fixed in the air handler. They are downstream in the ductwork. There are also some gas and electric duct heaters which are mounted in the ductwork. They are completely reliant on the air handler for air flow. These systems will also be covered. Hopefully, this article will offer you a comprehensive look at the air handler, all its parts, and how it functions. (more…)