by High Performance HVAC | Thermostats |
Thermostat Wire - Thermostat wire comes in a bundle with the outer jacket being either brown or white. The bundle can have anywhere from 2 conductors inside the bundle or outer jacket and all the way up 8 or 10 conductors inside the outer brown or white jacket. The bundle for typical wire is 18 gauge solid copper conductors and each has its own outer jacket that is a different color than any of the other conductors in the bundle. These multi-color wires are colored differently for identification from one end of the bundle to the other end of the bundle. It can be purchased in a bundle as follows:
This article refers to conventional thermostat wire which is different than the wire you would have if you have a communicating thermostat.
(more…)
by High Performance HVAC | Thermostats |
Running New Thermostat Wire – It is possible that you may have to run a new thermostat wire from the air handler or furnace to the location where the existing thermostat is located. Running new thermostat wire can challenging even for professionals. If you must then following these instructions and helpful hints will hopefully help you in this endeavor. Pulling new wire should only be done as a last resort. The purpose of running new thermostat wire is necessary for certain reasons such as: (more…)