Boiler Stainless Steel Exhaust Flue Stack
Boiler Stainless Steel Exhaust Flue Stack: This is a photo of a boiler stainless steel exhaust stack. It is used for venting corrosive boiler combustion gases. As the flue gases leave the boiler they cool and depending on the dew point of the gas, the gas will experience a change of state. It will change from a gas to a liquid. This liquid is highly corrosive and only special flues like stainless steel vent can be used when this occurs. Stainless steel prevents premature failure of the boiler vent.
There are many considerations to consider with a new installation of a heating system in comparison to the type of vent to be utilized. The venting system used to vent the gases from the boiler or furnace safely outdoors. It is imperative that safety guidelines be followed when installing any type of venting system for furnaces or boilers using fossil fuels. For detailed information concerning code requirements for installation of venting systems see the IFGC or International Fuel Gas Code. Chapter 5 and Appendix C of the IFGC offer detailed requirements for the installation of venting systems.
Never sacrifice safely, consult a professional when in doubt. There are many rules to follow. A professional will know these rules and apply them as they install the system. They will also, have the system inspected by the code official in your area to double-check to ensure safety guidelines were followed
