Evaporator Coil Heat Pumps Air ConditionersEvaporator Coil Heat Pumps Air Conditioners – the evaporator is responsible for absorbing heat into the coils and the refrigerant. The evaporator is an essential component of vapor compression refrigeration. This is usually done as result of passing air or water over the evaporator coil where a heat exchange process takes place. Heat leaves the air or water (whatever medium is used) and is absorbed into the coil and the liquid refrigerant. As more and more heat is absorbed by the evaporator coil and the refrigerant again changes state from a liquid to a refrigerant vapor. By the time the refrigerant leaves the evaporator coil the refrigerant should be all vapor and ready to be received again by the refrigeration compressor.

Evaporator Coil Heat Pumps Air Conditioners - Refrigerant Flow & Types

The evaporator is typically inside the air handling unit or it can be installed in the duct work near the air handling unit. When the air handler blower turns on and the condenser is running refrigerant flows from the compressor through the condenser and then through the metering device. and into the evaporator. Evaporators used in residential and light commercial HVAC can be classified as finned evaporators. There are other types of evaporators used for various applications but finned evaporators are used extensively for HVAC. Various types of evaporator coils used for heat pumps and air conditioners include:

  • A coils. These are typically in the shape of an “A”. See the photo below for an example of an A-coil evaporator.
  • Slab coils - A slab coil is simply one solid piece of coil. It looks similar to a radiator in your car.
  • N-Coil - Basically, the coil looks like an “N”.

Coils for air conditioners and heat pumps can be purchased cased or uncased. In other words, the coil can come in a custom made cabinet or just stand alone coil. Usually, the stand alone coil is purchased to replace an existing coil that is already installed in its own cabinet. A cased coil is also installed in the ductwork near the air handler. This all depends on the installation, the air handler and the configuration.

Evaporator Coil Heat Pumps Air Conditioners | Materials and Maintenance

Coil Materials | Evaporator Coil Heat Pumps Air Conditioners

There are some special order evaporators coils that are all copper. These are normally used in health care facilities. Copper inhibits the growth of mold and mildew, thus the reason why it is used in healthcare facilities. These coils are extremely expensive compared to the typical coils made from copper with aluminum fins.

The refrigerant changes state in the coils. In the evaporator coil the change of state is from a liquid to a vapor while in the condenser the change of state is from a vapor to a liquid. This is all necessary for the process of refrigeration to work properly. The typical evaporator coil is constructed of copper with aluminum fins surrounding the copper coils. The aluminum fins adds surface area to the copper coils and enhances the heat exchange rate making the coils more efficient. Although some manufacturers are switching to all aluminum coils in both the condenser and the air handler evaporator coil. For more on this you can read our article titles aluminum versus copper coils.

Coil Maintenance | Evaporator Coil Heat Pumps Air Conditioners

The best way to maintain evaporator coils is keep a good clean filter in your system. Additionally, it is also a good idea to make sure you have good tight ductwork. Small leaks in the return duct can cause your evaporator coil to load up with dust and dirt. This inhibits airflow and eventually will cause the system to fail. It is essential that the coil gets the designed amount of airflow across the coil for the heat exchange process. Clogged air filters have a detrimental affect on the system also. Furthermore, having no air filter in the system is very bad and WILL lead to failure. Lastly, make sure you take care of your evaporator by keeping a good clean filter in the system.

Evaporator Coil for Heat Pumps & Air Conditioners - Fixing a refrigerant leak on an evaporator coil

A new evaporator coil replacing an old leaking coil. This is an “A”-Coil, uncased.

Finally, for more information on HVAC and heating and cooling use this resource.

High Performance HVAC

Evaporator Coil for Heat Pumps & Air Conditioners

To learn more about heating systems and HVAC use this resource.

See the About the Author page for information about the author of this article.

Share your HVAC Photos or ask a question about your HVAC System by uploading a photo of it.

Photo Uploads
Enter your name so we can credit you
If you have a website enter your website URL for additional credit
If you want to include a description then do so here.
Drop a file here or click to upload Choose File
Maximum upload size: 33.55MB
jpe, jpeg, jpg, gif, png, bmp, docx, doc, txt and PDF files allowed to be uploaded. Limit 15 files total and 100 mb/s max size.