Tag Archives: open areas

HVAC Reznor Heating System | LP Gas Unit Heater

HVAC Reznor Heating System - LP Gas Unit Heater

HVAC Reznor Heating System | LP Gas Unit Heater

HVAC Reznor Heating System LP Propane Gas Unit Heater – this Reznor unit heater provides heating for warehouses, garages, and other open spaces which can be heated with unit heaters. Unit heaters are ideal for big open areas which need heating without duct work being used to channel the air into the space. Sometimes these unit heaters are also used in mechanical rooms for protection of the other HVAC equipment and piping to prevent freezing conditions inside the mechanical rooms. The unit heater can be quickly installed and put into service in only a few hours once electrical service and gas service is provided in the location where the unit heater will be located. This unit heater is located in a remote camp site where electricity is available but natural gas was not available. LP or Liquefied Propane is trucked in to fill large LP Propane tanks located near the buildings which use these unit heaters to produce heat. A propane piping system and a series of propane gas regulators were installed and these unit heaters utilize the propane in the tanks being fed by this piping system. The regulators reduce the pressure from the tank to a usable pressure for the unit heater.

Read more ...

VAV Air Handler | HVAC Zoning

 VAV Air Handler | HVAC Zoning

VAV Air Handler and HVAC ZoningVAV Air Handlers are ideal for providing zones in a commercial building. Office space typically has several offices and open areas that need to be conditioned for the comfort of the people working in those areas or offices. By installing VAV boxes and zoning the duct work from those VAV boxes these areas and offices can be kept comfortable using a VAV air handler system. Each box can have its own thermostat and that area or office served by that particular VAV box can be maintained and conditioned for the people working in that space. The VAV box will receive its conditioned air from an air handler through a primary duct that feeds air to the VAV box. The VAV box then determines the amount of air to the secondary duct by a damper located in the VAV box. Depending on what the thermostat temperature set point is and the temperature in the space will determine the amount of air flow the space will receive from the VAV box. Additionally, A box with reheat will energize the heat strips or open the actuator for the hot water coil if the set point and room temperatures calls for the reheat to provide heat to the space (If the VAV box is equipped with reheat).

Read more ...

Search

TUESDAY, OCTOBER 28, 2014